Sulfatone | Stoploss | Seal | Magna Lube | Mineral Lube | Lubri-Slide | PHPA Sticks | Ceramic Beads

LUBRI-SLIDE
DRILLING LUBRICANT  

LUBRI-SLIDE is a high-tech lubricant specifically formulated for highly deviated or horizontal drilling applications.

LUBRI-SLIDE has a high affinity for metal surfaces, and will adhere tenaciously to drill pipe and drill collars. This guarantees that the lubricant will be concentrated exactly where it is needed, between the pipe and the formation. This enables the pipe to slide effectively without excessive loss of weight to the bit. LUBRI-SLIDE eliminates torque and drag, prevents differential sticking, and protects the drill pipe from corrosion.

RECOMMENDED USE :

• SLIDING PILL LUBRICANT
  • LUBRI-SLIDE works superb for sliding procedures in horizontal wells. Add one (1) gallon of LUBRI-SLIDE for each barrel of drilling fluid in slide pill. Do not agitate in slugging pit.
    
• MUD SYSTEM LUBRICANT
  • The extreme efficiency of LUBRI-SLIDE allows for low use levels. For a typical 800-1000 bbl. System, add three (3) drums slowly (one hour per drum). Maintain the system with two (2) drums per day while drilling. Always add the product s-l-o-w-l-y into the suction pit as close to the suction line as possible

PACKAGING, HANDLING AND STORAGE: Packaged in 55 gallon steel drums or 5 gallon plastic pails. Handle with caution. Contains petroleum distillates. Avoid contact with skin and eyes. If skin contact occurs, wash with soap and water. If eye contact occurs, flush with water for 15 minutes; contact physician.

Store between 40 ° – 120 ° F.